Arancia Lighting » Products

Toro Wall

TORO is an elegant and modern thin ring of bright light. Its integral lens, a perfectly diffused satin acrylic piece, is held between fine rims of aluminum. This innovative layered assembly enables mix and match finishes, making a two tone light fixture possible as a standard. And now, it also comes in a wall configuration.

Ra

Pendant luminaire made from a tapered aluminum shade and a reflector disk in the center. This elegant luminaire providing a diffuse yet powerful light in direct and indirect configurations. Available in three different sizes.

Frici Evo

Modular glowing stick pendant LED luminaire, made of machined frosted polymer and aluminum joiners. This simple system allows for modules to be added as desired to form a continuous homogenous lit line. Simply powered by a suspension cable for a clean look. Available with dimming options.

Y1

A minimal tapered aluminuum profile that provides a wide spread of light. This versatile module can be use as a direct or indirect light source. Only available in standalone units.

Y2

Minimal hourglass shaped aluminium profile that provides a wide spread of direct and indirect light. Only available in standalone units

Y3

A minimal aluminum profile forming an array of light on three sides, providing a wide spread of light. Only available in standalone units

Y4

A minimal aluminum profile forming an array of light on all directions, providing a wide spread of light. Only available in standalone units.

Nido

Minimal slanted shade made out of spin aluminium. It can be installed as both standalone and clusters, and the cable lengths can be adjusted separately.

Boop

Dome like aluminum made direct luminaire, available in three different shade sizes. Comes standard with field adjustable 60 inches aircraft cables. Compatible with Triac and 0-10V dimmers.

Boop Surface

Dome like aluminum shade ceiling luminaire, this direct and bright luminaire is available in three different shade sizes. Comes standard with field adjustable 60" aircraft cables. Compatible with Triac and 0-10V dimmers

Cy

Sci-fi inspired pendant LED luminaire, made of machined frosted polymer and rolled aluminum shade available in two single sizes. Dimming options available.

Cy3

Sci-fi inspired pendant LED luminaire, made of machined frosted polymers and rolled aluminum shade which comes with an array of three 21 inches luminous tubes. Dimming options available.

Frici 2

Glowing stick pendant LED luminaire, made of machined frosted polymer and aluminum caps. Suspension cable doubles as power cable for a simpler, cleaner look. Dimming version available.

Wav

Glowing LED stick and perforated shade luminaire, made of machined frosted polymer and aluminum sheet. This wave shaped pendant is simply powered by a suspension cable for a clean look. Available in all our standard finishes and with dimming option

Frici Vert

Vertical glowing tube pendant LED luminaire, made of machined frosted polymer and aluminum bar. Simply powered by a suspension cable for a clean look.

Frici Wall

Glowing stick wall mounted LED luminaire, made of machined frosted polymer and aluminum caps and light tray. Dimming version available.

Toro

TORO is a elegant and modern thin ring of bright light. Its integral lens, a perfectly diffused satin acrylic piece, is held between fine rims of aluminum. This innovative layered assembly enables mix and match finishes, making a two tone light fixture possible as a standard.

Sol

SOL is an elegant and modern thin ring of radiant bright light. Its integral lens, a perfectly diffused satin acrylic piece, is held between fine rims of aluminum. This innovative layered assembly enables mix and match finishes, making a two tone light fixture possible as a standard.

Toro Orbit

TORO ORBIT is an assembly of multiple luminous suspended rings, that allows you to create your own array of fixtures by combining different sizes, finishes and orientation of the suspended luminous rings.

Fold

Modular pendant system that can be built and positioned as needed, based on the classic architect's folding ruler. Available in direct light distribution, with either satin optics or microprismatic lens. Joints can be fitted with optional spots.

Fold Stacker

Arborescent pendant system that can be built and positioned as needed, based on the classic architect's folding ruler. Available in direct light distribution, with either satin optics or microprismatic lens.

Elli

Indirect LED ceiling mount, made of machined aluminum and three spots. Standard finishes can be applied or customized to meet your projects requirements.

Jack

Extruded aluminum linear lighting system that can be specified in a variety of lengths. An extruded impact resistant frosted acrylic lens provides a diffused glow. Dimming version available.

Jack Double

Extruded aluminum linear lighting system that can be specified in a variety of lengths. An extruded impact resistant frosted acrylic lens provides a diffused glow. Dimming version available. Direct indirect version.

Mini Jack

Slimmer version of our extruded aluminum linear lighting system that can be specified in a variety of lengths. Our standard extruded impact resistant frosted acrylic lens provides a diffused glow. Suspended from field adjustable aircraft cables. Corners and dimming versions available.

Mini Jack Double

Max

A simple, minimal, standalone fixture.

Max +

A minimal aluminium profile that provides direct and indirect light sources. Comes in a variety of lenght and color, only available in standalone units.

Max Surface

A minimal square aluminium ceiling that comes in a variety of length and color, only available in standalone units.

Watson S

This delicate and bright light ring is contained by a carefully finished metallic rim, of simple shape and elegant proportions.

Watson L

This delicate and bright light ring is contained by a carefully finished metallic rim, of simple shape and elegant proportions.

Watson M

This delicate and bright light ring is contained by a carefully finished metallic rim, of simple shape and elegant proportions.

Poci

A tiny multi-fonctionnal LED spotlight that packs a punch, designed to optimize the cooling of its high power COB light source. Made of machined aluminum, it can be installed on walls, ceilings and tracks. Swivel in polished machined stainless steel.

Poci Pendant

A tiny multi-fonctionnal LED pendant that packs a punch, designed to optimize the cooling of its high power COB light source. Made of machined aluminum.

Poci Surface

A tiny LED spotlight that packs a punch, designed to optimize the cooling of its high power COB light source. Made of machined aluminum.

Pixi

A high-intensity discrete LED light source meets a range of precisely molded lenses, and you get this tiny but mighty recessed downlight. Choose one of different collimators to rest above its reduced aperture (1 1/8"), and condense light: the narrowest available beam is less than 10°. Integrated driver. Dimming version available. Suitable for non insulated ceilings.

Dixi

A high-intensity discrete LED light source meets a range of precisely molded lenses. Recessed at a 45° angle, this mighty spot of 750lm comes with different collimators. Integrated driver and dimming version available. Suitable for non insulated ceilings.

Jet Surface

Micro-ceiling LED downlight made of solid machined aluminum. Its clean and compact cylindrical baffle reduces glare while its inner elliptical light chamber helps project light further, depending on finish. It can be installed in ceilings or walls as an accent standalone spot, or grouped in cluster patterns.

Silo Duo

Machined aluminum direct indirect luminaire, available in two housing lengths. Comes standard with two field adjustable 60" aircraft cables. Compatible with Triac dimmers.

Silo

Machined aluminum direct luminaire, available in two housing lengths. Comes standard with two field adjustable 60" aircraft cables. Compatible with Triac dimmers.

Johnny

Round convex LED step-light or furniture-light. Made of solid machined aluminum.

Jet

Micro-recessed LED downlight made of solid machined aluminum. Its clean and compact cylindrical baffle reduces glare while its inner elliptical light chamber helps project light further, depending on finish. It can be installed in ceilings or walls as an accent standalone spot, or grouped in cluster patterns.

Zero

Micro-recessed LED downlight made of solid machined aluminum. Regressed light emitter for reduced glare. It can be installed in ceilings or walls as an accent standalone spot, or grouped in cluster patterns.

Newton

Micro recessed prism LED step-light. Casts an asymmetric wedge of light on the mounting surface. Made of solid machined aluminum and PMMA.

Planes

Direct-indirect wall-mounted fixture. Suitable for damp locations. Made of machined aluminum.

Syla

Multi-fonctionnal spotlight that can be installed on walls, ceilings and tracks, with or without stem. Made of machined aluminum, swivel in polished stainless steel.

Sky

Machined aluminum direct pendant luminaire, available in two housing lengths. Suitable for damp locations. Compatible with Triac dimmers.

Sky Surface

Machined aluminum direct luminaire, available in two housing lengths. Ceiling mount and suitable for wet locations. Compatible with Triac dimmers.

Pill

Direct wall-mounted fixture. Suitable for damp locations. Made of machined aluminum.

Pills

Direct-indirect wall-mounted fixture. Suitable for damp locations. Made of machined aluminum.

Plane

Direct wall-mounted fixture. Suitable for damp locations. Made of machined aluminum.

Box

Direct-indirect wall-mounted fixture. Made of machined aluminum.

Mini

Slim wall-mounted fixture. Satin acrylic diffuser inserted in a machined aluminum structure. Suitable for damp locations.

Mini 2

Slim wall-mounted double fixture. Satin acrylic diffusers in a machined aluminum structure. Suitable for damp locations.

Mike

Slim pendant fixture. Satin acrylic diffuser inserted in a machined aluminum structure. Suitable for damp locations.

Boya

Clear pressed glass LED pendant, with sandblasted interior finish, also available in clusters.

Sun

Round convex LED to be installed in drywall. Made of solid machined aluminum.

Sun Furniture

Round convex LED to be installed as step-light or furniture-light. Made of solid machined aluminum.

Sun Surface

Round convex LED to be mounted on any surface. Made of solid machined aluminum.

Halo

Round indirect LED step-light or furniture-light. Made of solid machined aluminum.

Halo Furniture

Round indirect LED to be installed as step-light or furniture light. Made of solid machined aluminum.

Halo Surface

Round indirect LED to be mounted on any surface. Made of solid machined aluminum.

Moon

Round flat LED to be installed in drywall. Made of solid machined aluminum.

Moon Furniture

Round flat LED step-light or furniture light. Made of solid machined aluminum.

Moon Surface

Round flat LED to be mounted on any surface. Made of solid machined aluminum.

Kono

Installed flush with the ceiling line, this conical fixed downlight has a very discrete presence with its reduced diameter and regressed light source position.

Kono Tilt

Installed flush with the ceiling line, this recessed fixture becomes virtually invisible and glare-free. Its deep regressed spot allows it to be tilted on 80°, and rotated on a true 360°. High adjustability and small aperture make this a versatile stealthy luminaire.

Pola

Installed flush with the ceiling line, this circular recessed trim becomesvirtually invisible and glare-free with its regressed light source. No light is wasted in the trim even when pivoted to its maximum, as the adjustable snoot projects slightly from the ceiling. In addition to the clear anti-dust glass lens, one additional optional secondary optic can be fitted.

Pola Trim

Round recessed made of machined aluminum with long snoot. This versatile downlight can be installed in any ceiling. No light is wasted in the trim even when pivoted to its maximum, as the adjustable snoot projects slightly from the ceiling.

Pola Short

Installed flush with the ceiling line, this circular recessed trim becomes virtually invisible and glare-free with its regressed light source. The adjustable snoot is designed so that no light is wasted in the trim even when pivoted to its maximum. In addition to the clear anti-dust glass lens, one additional optional secondary optic can be fitted.

Pola Trim Short

Round recessed made of machined aluminum with short snoot. This versatile downlight can be installed in any ceiling. No light is wasted in the trim even when pivoted to its maximum, as the adjustable snoot projects slightly from the ceiling.

Bato

Compact round downlight made of solid machined aluminum. Baffle and decorative plate can be different colors. Fixed beam. Suitable for damp locations.

Nemo

Square compact downlight made of solid machined aluminum. Baffle and decorative plate can be different colors. Fixed beam. Suitable for damp locations.

Bill

Square compact downlight made of solid machined aluminum. Inner baffle and decorative ring can be different colors. Adjustable beam.

Bills

Compact rectangular double downlight made of solid machined aluminum. Baffle and decorative plate can be different colors. Adjustable beams.

Bob

Round compact downlight made of solid machined aluminum. Inner baffle and decorative ring can be different colors. Adjustable beam.

Trimless

Installed flush with the ceiling line, this circular recessed trim becomes virtually invisible. Adjustable beam.

Sola

Round recessed down light made of solid machined aluminum featuring a slightly regressed light source. Adjustable beam.

Sin 1

Multi-fonctionnal spotlight that can be installed on walls, ceilings and tracks, with or without stem. Made of machined aluminum.

Sin 2

Multi-fonctionnal spotlights that can be installed on walls, ceilings and tracks, with or without stem. Made of machined aluminum.

Sin 5

Multi-fonctionnal spotlight that can be installed on walls, ceilings and tracks, with or without stem. Made of machined aluminum.

Big Mike

Slim pendant fixture. Satin acrylic diffuser inserted in a machined aluminum structure. Suitable for damp locations.

Joy

JOY is a fabric suspension light with an acrylic diffuser. Custom sizes and colors are available.

Simplex

Square recessed downlight, made of solid machined aluminum. Adjustable gimbal mounted light source.

Duplex

Rectangular recessed downlight, made of solid machined aluminum. Adjustable gimbal mounted light sources.

Triplex

Rectangular recessed downlight, made of solid machined aluminum. Adjustable gimbal mounted light sources.

Jack Recessed

Recessed extruded aluminum linear lighting system that can be specified in a variety of lengths. An extruded impact resistant frosted acrylic lens provides a diffused glow. Trimless installation option, and dimming version available.

Pola Surface

Ceiling surface mounted luminaire with adjustable head, designed so that no light is wasted in the trim even when pivoted to its maximum. In addition to the clear anti-dust glass lens, one additional optional secondary optic can be fitted. High powered chip-on-board LED sources available. Compatible with Triac dimmers.

Silo Surface

Machined aluminum direct luminaire, available in two housing lengths. Ceiling mount. Compatible with Triac dimmers.

75 mm

Multi-fonctionnal LED spotlight that can be installed on walls, ceilings and tracks, with or without stem. With its interchangeable optics nested in a core of machined aluminum parts, it is mounted on a linear box for added character.

75 mm Twin Cannon

Multi-functional double spotlights that can be installed on walls, ceilings and tracks, with or without stem. With its interchangeable optics nested in a core of machined aluminum parts, it is mounted on a linear box for added character.

Pola Box Duo

Ceiling surface mounted luminaire with independent heads which optics can be adjusted separately; interchangeable reflectors, two snoot lengths, and high powered chip-on board LED sources are available. Compatible with Triac dimmers.

Pola Box

Ceiling surface mounted luminaire with adjustable projector head, which optics can be adapted to any situation; interchangeable reflectors, two snoot lengths, and high powered chip-on board LED sources are available. Compatible with Triac dimmers.

75mm Wall

Multi-fonctionnal adjustable spotlight that can be installed as wall sconces and bed lights. Made of machined aluminum.

Nox

Multi-fonctionnal spotlight that can be installed on walls, ceilings and tracks, with or without stem. Made of machined aluminum, swivel made of polished stainless steel.

Plane Surface

Machined aluminum direct luminaire, available in two housing lengths. Ceiling mount and suitable for damp locations. Compatible with Triac dimmers.

Blox

Machined solid aluminum wall-mounted fixture. Can be either installed to small device boxes or direct mounted.Direct-indirect light distribution.

Tubo

A medium-sized multi-fonctionnal LED spotlight, designed to optimize the passive cooling of its high power COB light source. Made of machined aluminum.

Jack Wall

Extruded aluminum linear lighting system that can be specified in a variety of lengths. Our standard extruded impact resistant frosted acrylic lens provides a diffused glow. Simplified wall installation with slim machined aluminum and steel hardware. Dimming version available.

Tubo Pendant

A medium-sized multi-fonctionnal LED pendant, designed to optimize the passive cooling of its high power COB light source. Made of machined aluminum.

Mini Jack Surface

Extruded aluminum linear lighting system that can be specified in a variety of lengths. An extruded impact resistant frosted acrylic lens provides a diffused glow. Simplified surface installation with slim machined aluminum and steel hardware. Dimming version available.

Jack Wall Double

Jack Surface

Jack Pola

Fixed spots can be integrated to the Jack System linear family, in both MR16 and LED. Each spot adds 6" to fixture length; multiple heads in series will be evenly spaced along a given length. Multiple sizes, fi nishes and dimming version available. (See the Jack family for more details)

Kite

KITE's thin secondary reflector hovers above a curved aluminum light cradle and bounces light off, resulting in a strong but diffused indirect illumination. Its custom-designed LED light engine sits below a formed satin lens that's held in tension, sealing it from dust. KITE comes dimmable as standard; simply choose between available types.

Kite Surface

Thin reflector that hovers beneath the ceiling and bounces off light coming from a curved aluminum light cradle, resulting in a strong but diffused indirect illumination. Its custom designed LED light engine sits below a formed satin lens that is held in tension, sealing it from dust. Kite comes dimmable as standard; simply choose between available types.

Pola Pendant

Suspended luminaire with adjustable head, designed so that no light is wasted in the trim even when pivoted to its maximum. In addition to the clear anti-dust glass lens, one additional optional secondary optic can be fitted. High powered chip-on-board LED sources available. Compatible with Triac dimmers.

Pong

Indirect round LED wall sconce, made of machined and formed aluminum. Standard finishes can be applied to cosmetic disc faceplate, or customized to meet your projects requirements.

Pong Surface

Indirect round LED wall sconce, made of machined and formed aluminum. Standard finishes can be applied to cosmetic disc faceplate, or customized to meet your projects requirements.

Jack Poci

A tiny multi-fonctionnal LED spotlight that packs a punch, now added to the family of accessories for the Jack family of linear fixtures. Made of machined aluminum, its swivel is made of polished machined stainless steel. Each spot adds 6" to fixture length; multiple heads in series will be evenly spaced along a given length.

Jack Pivo

Adjustable spots can be integrated to the Jack System linear family, in both MR16 and LED. Each spot adds 6" to fixture length; multiple heads in series will be evenly spaced along a given length. Multiple sizes, fi nishes and dimming version available.